Houston Metal Gates & Fences Masters|Custom Fabrication, Repair, & Replacement
For over 20 years, Houston Metal Gates and Fences Masters has crafted durable perimeter security across Harris County. We design, fabricate, install, and repair custom driveway gates, metal fencing, and automated access control systems. To prevent system failures, our team sets deep-set concrete footings tailored to local clay and applies heavy-duty powder coating over a zinc-phosphate primer on all CNC-fabricated steel, wrought iron, and aluminum systems.
We automate gate systems using heat-resistant LiftMaster, FAAC, and All-O-Matic operators fully compliant with UL 325 safety standards. Our team manages City of Houston Chapter 42 permits and handles complex HOA architectural review submissions for master-planned communities. AWS-certified in structural welding, UL 325 safety certified, fully bonded, and insured, our team delivers long-lasting perimeter protection to residential and commercial properties
Get a FREE Quote
Why Choose Houston Metal Gates & Fences Masters
Custom Fabrication for Every Property
Every gate and fence is fabricated to the exact dimensions of your specific Houston property rather than modified from standard panels.
Full Project Coordination
We handle site measurement, material selection, post-placement hardware specification, operator coordination, and installation under a single crew.
Houston Climate Expertise
Every material finish and fabrication detail is selected for Houston's humidity frequent Gulf Coast rainfall and coastal salt air conditions.
Automated Gate Specialists
Every automated gate installation is designed around the operator safety devices, vehicle access requirements, and power source location.
Repairs and Replacements Covered
We fix hinge failure, post lean, latch misalignment, panel damage, and hardware corrosion on existing Houston gate and fence systems.
Finish and Coating Guidance
We help every Houston property owner select between powder coat and paint systems matched to the fence's intended use and maintenance plan.
Custom Metal Gate Fabrication & Installation Services
Custom Driveway Gate Fabrication
We fabricate custom driveway gates using 11-gauge or 14-gauge structural steel treated with multi-stage protective coatings engineered for coastal humidity. Our team designs swing and sliding configurations built for local wind loads, providing site evaluations, deep soil footings, and complete permitting.
Wrought Iron Gate Installation
We build and install custom ornamental wrought iron gates tailored to match the historic Craftsman and Victorian architecture of the Houston Heights. Our installation methods accommodate pier-and-beam foundation conditions to anchor posts safely, integrating LiftMaster or FAAC automation without altering gate designs.
Luxury Driveway Gate Automation
We automate driveway gates for River Oaks estates using whisper-quiet LiftMaster LA500 or FAAC 760 swing operators sized to your gate's weight. Our team integrates Viking or DoorKing entry units at comfortable driver heights, including UL 325 sensors and Chapter 42 permits.
Steel Security Gate Installation
We build heavy-duty 11-gauge steel security gates with welded gussets, tamper-resistant hardware, and operator-ready frames for Katy properties. Our team customizes picket spacing, overall height, and lock box configurations while managing all HOA approvals, UL 325 safety sensors, and Harris County permits.
Sliding Gate Automation and Installation
We install cantilever slide gate systems engineered to prevent the track binding and derailment caused by Beaumont Clay soil heave. Our team sizes LiftMaster SL3000 or All-O-Matic operators to your gate's weight, including UL 325 entrapment sensors and complete Chapter 42 permitting.
Driveway Gate Fabrication and Installation
We manage your entire driveway gate project from CAD measurements to shop welding, protective finishing, deep footing installation, and operator integration. Handling fabrication and installation with our own licensed crew eliminates alignment tolerance issues, and we secure all City Chapter 42 permits.
Automated Gate Systems & Access Control Services
Electric Gate Operator Repair
Our technicians repair electric gate operators that stick, stop mid-cycle, or fail to respond from worn gears or shorted control boards. We evaluate physical travel alongside electronic components, verifying every repair through a full UL 325 cycle.
Automatic Gate Operator Installation
We install automatic gate operators sized precisely to your gate's total weight, leaf length, daily cycle volume, and wind resistance. Selecting LiftMaster, FAAC, or All-O-Matic motors prevents thermal overload, while our team secures required Sugar Land HOA approvals.
Electric Slide Gate Motor Replacement
We replace failing Cypress slide gate motors with heavy-duty LiftMaster SL3000 or All-O-Matic units when repairs become cost-ineffective. The scope covers pad preparation, chain alignment, limit calibration, remote programming, and Beaumont Clay track heave assessments.
Access Control System Installation
We install Viking keypads, DoorKing telephone entry units, card readers, and vehicle loops at ergonomic driver heights. Our crew uses weather-resistant conduit built for Katy's high humidity and secures HOA architectural board approvals prior to mounting.
Gate Protection Sensor Installation
We equip automated gates across Houston with UL 325 compliant entrapment protection sensors to safeguard vehicles, pedestrians, and pets. Our technicians install dual-monitored photo eyes and contact edges, thoroughly calibrating and documenting all parameters for city inspections.
Commercial Gate Control & Operator Repair
Our team provides fast-response repair and maintenance for heavy-duty commercial gate operators, high-speed barrier arms, and Knox Box emergency systems. We service high-traffic industrial yards and multi-family complexes using continuous-duty LiftMaster and FAAC equipment compliant with UL 325.
Metal Fence Installation, Repair & Restoration Services
Commercial Metal Fence Installation
We install heavy-gauge 11-gauge structural tube steel fencing to secure warehouses, corporate offices, storage yards, and industrial facilities. Our crews set post footings to exact Beaumont Clay depth requirements, managing all City of Houston Building Services permitting through completion.
Wrought Iron Fence Repair
We repair wrought iron and ornamental steel fences damaged by rust, broken welds, tree roots, and shifting soil in The Woodlands. Our team re-welds pickets, replaces corroded rails, applies zinc-rich primers, and secures required HOA architectural approvals before work begins.
Powder-Coated Aluminum Fence Installation
We install rust-proof, powder-coated aluminum fencing designed specifically for coastal properties near Galveston Bay and Clear Lake. Our crews rack panels along sloped Beaumont Clay lots without gaps, installing self-closing, self-latching safety gates for Texas code-compliant pool enclosures.
Wrought Iron Fence Panel Welding
Our mobile welders perform on-site TIG and MIG welding repairs for sagging, broken, or storm-damaged fence panels throughout Harris County. We re-weld pickets, reinforce high-stress joints with 3/16-inch steel gusset plates, and apply matching zinc-rich primers to restore structural integrity.
Iron Fence Restoration
We restore historic iron fencing in Montrose, preserving original hand-forged pickets, scrollwork, and masonry mountings without replacing period ironwork with modern steel. Our team uses mechanical wire brushing, chemical conversion coatings, and UV-resistant topcoats to eliminate rust while protecting craftsmanship.
Metal Fence Post Re-Cementing and Leveling
We level, realign, and re-cement leaning metal fence posts shifting from Beaumont Clay shrink-swell cycling. Our crew fully excavates failed concrete footings before pouring fresh 4,000 PSI concrete to proper subgrade depths, confirming post plumbness and gate latch alignment.
Metal Gate and Fence Materials We Fabricate and Install in Houston, TX
Wrought Iron Style Steel
As the most structurally versatile fabrication material available for Houston custom gates and fences, 11-gauge and 14-gauge structural tube steel seamlessly accepts scrollwork, pickets, and spear tops. Finished with a protective powder coat over zinc-phosphate primer to resist high humidity, it is ideal for Houston Heights, Montrose, and River Oaks estate applications requiring combined strength and custom ornamental design.
Aluminum
Powder-coated aluminum provides a rust-proof specification for residential pool enclosures and coastal properties near Galveston Bay and Clear Lake where marine air accelerates steel corrosion. Lightweight aluminum panels rack smoothly along sloped Beaumont Clay lots without gaps, reducing stress on post footings and gate operators. It is best specified for HOA-governed communities in The Woodlands, Sugar Land, and Katy.
Chain Link
Galvanized or vinyl-coated chain link delivers a cost-effective commercial security perimeter for industrial facilities, warehouses, and utility yards where structural performance takes priority over ornamental aesthetics. Available with privacy slat inserts for visual screening, chain link is best specified for expansive perimeters along Houston’s industrial corridors in the Ship Channel, East End, and northwest Harris County.
Galvanized Steel
Hot-dip galvanized steel offers exceptional corrosion resistance for heavy-duty commercial gates and fence applications exposed to Houston’s high humidity and rainfall. The molecular zinc coating sacrificially protects underlying steel from mechanical wear, impact, and weld heat that typically chips standard powder coats. It is best specified for Ship Channel industrial yards, loading docks, and high-traffic commercial gates.
Houston Metal Gates & Fences Masters
Driveway Gate Configurations
Single-Swing & Dual-Swing: Best for level driveways with adequate rear clearance.
Cantilever Slide: Ideal for sloped entries, tight spaces, and wide commercial openings. Recommended over ground-track models to prevent issues from Beaumont Clay soil heave.
Ground-Track Slide & Bi-Fold: Space-saving options for restricted layout areas.
Automated Systems & Access Control
Swing Gate Operators: Sized for residential gate weight and daily cycle volume.
Slide Gate Operators: Heavy-duty performance for high-traffic commercial and industrial entry points.
Access Hardware: LiftMaster and Viking keypads, long-range remotes, vehicle loop detectors, DoorKing telephone entry, card/fob readers, and mobile integration.
Safety & Emergency: Pedestrian hardware, exit loops, UL 325 photo eyes, and Knox Box emergency releases.
Fence Styles & Profiles
Vertical Picket: Open appearance with controlled spacing for homes, pools, and office perimeters.
Horizontal Slat: Modern look with adjustable privacy levels and thermal expansion management.
Welded Steel: Taller, anti-climb spacing with wind-load ratings for commercial and industrial sites.
Decorative Iron-Style: Custom scrollwork, finials, and ornamental rails for entryways and estates.
Corrugated Metal Panel: Full visual screening and wind resistance for privacy screens and industrial enclosures.
Core Specs: Zinc-phosphate primer, powder-coat finish, and elevated post-base clearances for regional drainage.
Houston Metal Gates & Fences Master's Installation Process
Initial Site Consultation & Estimation (1–7 Days)
- We measure your property line, evaluate grade changes, determine gate placements, and select the best materials for your security, privacy, and aesthetic needs.
- Timeline: Consultation scheduled and initial proposal delivered within 1 to 7 days.
Design Finalization & Deposit (Client-Dependent)
- We finalize your gate swing directions, latch and lock hardware, protective powder-coat finishes, and automated access control configurations.
- Timeline: Duration depends on how quickly you review and sign off on the design choices.
Permit Filing & HOA Review (1–4 Weeks)
- We compile and submit plot plans, product drawings, finish samples, and contractor credentials to your municipal building departments and HOA architectural review boards.
- Timeline: Administrative approval processing typically takes 1 to 4 weeks.
Utility Locating & Custom Fabrication (2–6 Weeks)
- We coordinate underground utility marking with local line locators while our shop cuts, welds, and powder-coats your custom steel or aluminum framework.
- Timeline: Off-site custom fabrication requires 2 to 6 weeks before field delivery.
On-Site Installation (1–7+ Days)
- We excavate footings to proper subgrade depths, pour concrete anchors, set posts, mount panels, and integrate gate operators and safety sensors on-site.
- Small Repairs & Replacements: 1 day.
- Residential Metal Fences: 1–3 days.
- Pedestrian Gates & Fencing: 2–4 days.
- Automated Driveway Gates: 3–7 days.
- Commercial Perimeter Systems: Several days to multiple weeks.
Testing & Final Inspection (1 Day)
- We align all latches, inspect field welds, calibrate UL 325 safety sensors, test operator cycles, and walk the completed project with you.
- Timeline: System testing and final client sign-off take 1 day.
Permitting, HOA, & Regulatory Requirements
Installing a custom metal gate or perimeter fence across Greater Houston requires careful coordination with local municipal codes and neighborhood associations to avoid expensive delays or mandatory teardowns.
When navigating City of Houston and Harris County Permits, specific project details trigger mandatory municipal reviews. Any trade work involving dedicated electrical circuits for gate operators, keypads, vehicle loops, or lighting requires formal trade permitting.
Beyond standard height thresholds, structural and right-of-way reviews are required for oversized gate systems, heavy masonry columns, or driveway modifications near public streets. Additionally, stringent local zoning and drainage guidelines govern commercial perimeter fencing, multi-family developments, recorded utility easements, natural drainage paths, and regulated floodplains.
For properties in Master-Planned Communities—such as Katy, Cypress, Sugar Land, Pearland, The Woodlands, Cinco Ranch, and Bridgeland—HOA architectural board approval is mandatory prior to ordering custom materials or breaking ground.
Associations strictly enforce parameters including maximum fence height, approved finish colors, vertical picket profiles, front building set-back lines, and pool enclosure barrier safety codes. To secure a smooth approval, we prepare a complete submission package containing your marked plot plan, detailed structural specifications, material finish samples, custom gate renderings, and full contractor credentials.
Metal Gate and Fence Costs in Houston, TX
Houston Driveway Gate Installed Costs
Understanding custom driveway gate pricing in Houston requires evaluating the opening width, frame weight, structural posts, and physical operation type (swing vs. slide) necessary for your property layout.
Gate Type / Configuration | Typical Installed Price | Key Cost Factors & Considerations |
|---|---|---|
Basic Manual Steel / Ornamental Gate | $3,000 – $7,000 | Basic steel posts, standard width leaf frames, standard latch hardware |
Custom / Heavy-Duty Swing Gate | $8,000 – $20,000+ | Heavy-gauge frames, double-leaf construction, custom scrollwork, wide openings |
Custom Cantilever or Track Sliding Gate | $8,000 – $20,000+ | Cantilever hardware, roller guides, counterweights, operator mounting pads |
Masonry Columns & Custom Additions | Line Item Additions | Brick/stone masonry, old gate removal, electrical line drops, CAD design |
Houston Metal Fencing Installed Rates
Metal fencing costs in Greater Houston are calculated per linear foot based on material gauge, panel height, terrain changes, site prep requirements, and post footing depths for local soil conditions.
Fence Material / Style | Price per Linear Foot | Key Cost Factors & Considerations |
|---|---|---|
Basic Ornamental Aluminum Fencing | $30 – $60 / linear ft | Light-to-medium gauge panels, standard post footings, pre-fabricated runs |
Welded Steel / Wrought Iron-Style Fencing | $50 – $120+ / linear ft | Heavy 11- or 14-gauge steel, zinc-phosphate primer, custom powder coat |
Custom Fabricated Steel Fencing | $120+ / linear ft | Site-specific post engineering, hand-welded pickets, custom heights/profiles |
Common Upgrades & Site Preparation | Line Item Additions | Walk gates with self-closing hardware, old fence tear-out, core drilling |
Houston Properties Have Never Looked Better!
Custom Gates and Fences FAQs
We fabricate and install custom single-swing, dual-swing, cantilever slide, and ground-track driveway gates, alongside pedestrian, pool, and security gates. Perimeter fencing options cover ornamental wrought iron-style steel, heavy 11-gauge tubular steel, powder-coated aluminum, and chain link—featuring flat-top, arched, spear-point, scrollwork, or privacy-slat profiles.
Yes, depending on height, location, and power needs. Automated gates, dedicated electrical circuits, masonry columns, and installations in public rights-of-way or floodplains require City of Houston Chapter 42 or Harris County permits. We manage the entire permitting process, including UL 325 safety sensor documentation.
Costs depend on material gauge, dimensions, design complexity, subgrade footings, and automation. Ornamental aluminum fencing starts around $30–$60 per linear foot, while welded steel runs $50–$120+. Manual driveway gates typically cost $3,000–$7,000, whereas custom automated swing or slide gate systems range from $8,000 to $20,000+
Yes, we provide metal fence and wrought iron gate repair services. Mobile welding crews repair broken welds, sagging frames, rusted pickets, damaged hinges, and posts displaced by Beaumont Clay soil heave. For automated systems, we diagnose mechanical alignment and replace failed LiftMaster, FAAC, or All-O-Matic operators, control boards, and entrapment sensors.
Standard residential fence installations take 1 to 3 days on-site, while automated driveway gates require 3 to 7 days. Off-site custom steel or aluminum shop fabrication generally adds 2 to 6 weeks following design approval, utility locating, and municipal permit clearance.
Yes, we can match an existing wrought iron fence or gate design. We take precise field measurements of picket spacing, rail dimensions, scrollwork, finials, and frame profiles to fabricate matching replacement panels or gate leaves. Protective finishes are custom powder-coated to match your existing color and texture seamlessly.